wiring help!

Status
Not open for further replies.

ty151

Member
Local time
9:35 AM
Joined
Jul 6, 2009
Messages
39
I have searched around a little and cant seem to find exactly what i need.

Im about to wire up my RAW 80cc kit and this is what I have:

From killswitch: Green, Yellow
From engine: Black, Turquiose, White
From CDI: Black, Blue

Now im pretty sure from what I have read is that:

1. Black from engine goes to Black from CDI
2. Turquiose from engine goes to Blue from CDI
3. White is capped off and not used unless for lighting, etc.

I just dont know what exactly to do with the two wires from the killswitch. The green has a loop on the end which seems to be the ground, which means i can either screw it into the frame somewhere or mount to engine? Which is better??

And the yellow from the killswitch has me stumped, where does this go? Its yellow with a red stripe. Thanks in advance
 
the white from engine goes to the kill switch yellow with red stripe.
the black wire from the kill switch grounds to bike frame,engine mount,muffler bolt,or black wire on engine
 
Status
Not open for further replies.
Back
Top