S Scott t Guest May 12, 2016 #1 I put an 18mm Mikuni on a Na 50 Honda express, I can't seem to get it to idle down. I've put in a 12.5 idle jet didn't seem to make any difference
I put an 18mm Mikuni on a Na 50 Honda express, I can't seem to get it to idle down. I've put in a 12.5 idle jet didn't seem to make any difference
D Deleted member 12676 Guest May 13, 2016 #2 make sure you have some slack in the throttle cable then use the slide stop to adjust the idle speed
KCvale In memory of KCvale 1959 - 2019 Local time 3:25 PM Joined Apr 18, 2010 Messages 3,508 Location Phoenix, AZ May 13, 2016 #3 jaguar said: make sure you have some slack in the throttle cable then use the slide stop to adjust the idle speed Click to expand... Well ya, the idle stop screw on the carb is the ONLY place to adjust idle.
jaguar said: make sure you have some slack in the throttle cable then use the slide stop to adjust the idle speed Click to expand... Well ya, the idle stop screw on the carb is the ONLY place to adjust idle.
KCvale In memory of KCvale 1959 - 2019 Local time 3:25 PM Joined Apr 18, 2010 Messages 3,508 Location Phoenix, AZ May 13, 2016 #5 Well, you have an odd engine and screwed with carb jetting, at least you know where where to start, the carb.
Well, you have an odd engine and screwed with carb jetting, at least you know where where to start, the carb.