Wtb: Sprocket Mounting Hardware

Discussion in 'For Sale' started by mnibike, Apr 20, 2009.

  1. mnibike

    mnibike New Member

    I want to buy that disk that comes in the kit to mount the sprocket to the wheel. I want the everything that goes with it, both discs,screws,etc.


  2. azbill

    azbill Active Member

    where are you located...I have a few extras
  3. mnibike

    mnibike New Member

    Overland Park, KS - 66224
  4. azbill

    azbill Active Member

    srdavo is in pittsburg(sp)

    I'm way over in arizona

    lemme know if you have any probs scoring a set (I don't have the funds to ship)
    or to change a dollar for that matter LOL
  5. mnibike

    mnibike New Member

    I dont understand? Of course shipping will be my cost. How about 15 shipped?
  6. Skyliner70cc

    Skyliner70cc Active Member

    I can do 2 sets for 15 shipped. I've got several lying around eating up space.
  7. MotorBicycleRacing

    MotorBicycleRacing Well-Known Member

    There are 2 diameters of 9 hole bolt patterns for the rear sprockets

    the Grubee style is smaller than the PK / RAW style

    the Grubee style I have comes with 2 metal rings with
    one for the inside and one for the outside
    One 3 piece 3 hole metal ring
    One 2 piece 4 and 5 hole metal ring

    I sell the Grubee Std. Sprocket installation kit 6mm 9 holes; for $10

    the Andyinchville sprockets include all 3 mounting hole patterns
    which include the 6 bolt disc brake mount and the 2 different
    9 hole diameters
    Last edited: Apr 21, 2009
  8. hal3844

    hal3844 New Member

    Sprocket mountaing hardware

    I need two sets if anyone has extras.
    Let me know.
  9. mnibike

    mnibike New Member

    Ok well I plan on using a pocket bike engine and am going to re-drill the holes so the pocket bike sprocket will bolt onto the the disc. I will be using a Trek Mountian Bike so which style should I use? If you can hook me up 10$ shipped is what you charge?
  10. mnibike

    mnibike New Member

  11. hal3844

    hal3844 New Member

    I need 2 sets for 9 hole install with the 2 rubber ring for each.
    If you have please email me back with contact info to send money and payment type required
  12. machiasmort

    machiasmort Active Member

    Don't know if anybody mentioned here or not, don't use the bolts from the Chinese kit, they are made of cheap steel and swap out easily with 1/4 20 American bolts and nuts. Found at Home Depot for about 13cents each!
  13. hal3844

    hal3844 New Member

    My plan was to pick up some grade 8 bolts, washers and locking nuts from my company parts room.
    I have learned from eperience.
    My company has to use graded on most everything so I have a endless supply and a real good friend in the supply room.....
    Thanks for the heads up.