XXXX

Mini bike is done so time for something new. My soon to be daily. I'm calling it 4X. This is what I'm starting with.

 

[Chainlube]

Back at this build, primed all the parts.

 

[Chainlube]

While I'm waiting for the paint to harden before I can cut and polish, I decided to do a little wheel treatment.

 

[Chainlube]

Quick update.

 

[Chainlube]

When you guys put in studs, the lock-tite doesn't have to cover the whole stud to be effective. These ones are just for my clutch cable adjuster so I used blue.

 

[Wrench]

That's what my girlfriend said "that it didn't have to cover the whole stud to be effective"

 

[Chainlube]

One more chapter closed, got the chain guide done. Only had to make one part three times. I used an old alternator bracket from a BBC that was previously frankinsteined for my spitfire.

 

[Chainlube]

That's what my girlfriend said "that it didn't have to cover the whole stud to be effective"

Ha ha, that's what she tells me too.

All nonsense aside, I've got brakes!

 

[wan37]

While I'm waiting for the paint to harden before I can cut and polish, I decided to do a little wheel treatment.

Hey did you have to modify frame for engine drive sprocket to fit on those mag wheels. I do know there is a sprocket adaptor for mag wheel. I didn’t want to add more stuff though if possible.

 

[Chainlube]

Hey did you have to modify frame for engine drive sprocket to fit on those mag wheels. I do know there is a sprocket adaptor for mag wheel. I didn’t want to add more stuff though if possible.

The sprocket bolts right to the mag, no kind of mount required, I stretched the frame for the chain to pass by and the wheels to fit. I built another bike that had painted wheels and the brakes would squeal, so these wheels I sanded off the paint and polished the edges to give it a nice custom look. Only needed to do rear wheel, but what the hey, nothing but time.

 

[wan37]

I read a lot of reviews on amazon on mag wheels.Most say to lock tite them bolts on the sprockets. I will sand the rim stripe for brakes thanks very good info.