i gather you installed a killswitch right beside the black ignition box? can you please explain you reason for doing this and which wires you connected to what? thanks
Hi..It is an on - off switch. I epoxied a small project box from radioshack to the side of the cdi. .I then brought the black and blue wires up into the box and hooked them into a molex connector. I took the blue wire from the cdi and ran it through the toggle switch and mounted it. The wire from the other post on the toggle goes into the mating side of the molex connector, along with the black wire from the cdi. I now have a on off switch and can unplug and replace the cdi if needs be...