Bolt on phase

[6blueoval9]

Does the 23mm adapter fit the read?

All 3 intakes bolt on to the reed...the differences in sizes are for different sized carburetors.

It comes with a 19mm, 21mm and 23mm intake.

 

[Stoneman]

All 3 intakes bolt on to the reed...the differences in sizes are for different sized carburetors.

It comes with a 19mm, 21mm and 23mm intake.

Can you show a photo of the 23mm apapter fitted?

I doubt it will

 

[Frankenstein]

Can you show a photo of the 23mm apapter fitted?

I doubt it will

Doubt it will fit what?

 

[Stoneman]

Doubt it will fit what?

The 23mm adapters don’t fit the reed.

They need to be modified to fit, I machine the nuts and the adapter to fit properly

 

[Stoneman]

The 23mm adapters don’t fit the reed.

you will either have to find new screws or machine the screws and the adapter body to make it fit properly without cutting to much of the screw or to much of the adapter to the point of weakening it

 

[machanic]

Use a cylindrical head allen bolt

 

[6blueoval9]

I'm just going to narrow the head of the pan head bolts or get different ones.

 

[machanic]

That will work and won't add any height, where did you get the larger OD reed valve spigots?

 

[6blueoval9]

It all came together as one purchase from Zedamotorsports...you get all 3 intakes with the kit but keep in mind no gasket to mount things to the cylinder

Moderators Note:
Please be aware that Zeda Motor Sports and Robert Bianchi have nothing to do with Zeda itself which is a manufacturer of Zeda Motors in China.
A reputable vendor of the Zeda line of motors can be found at bicycle-engines.com

 

[machanic]

Could you part with a 21mm, it's what I need for a mikuni carb I picked up, my zeda intakes only came with a 19mm OOPS! my mistake that is the OZ style I have the lesser RSE reed kit.