Custom Disk Mount Sprockets.

Discussion in 'Performance Mods' started by 210061741, Apr 27, 2010.

  1. 210061741

    210061741 Guest

  2. motorpsycho

    motorpsycho Active Member

    so how much is "dirt cheap"?
    what size sprockets are offered besides 30 tooth?
    is this something that you made or something that you bought?
  3. 210061741

    210061741 Guest

    It's something that i made.

    I would have to send the program to a source i have and get it priced.

    My guess would be $20.00 to $25.00 including the spacer plates, sprocket, and disk hub mounting plate.
    Everything you need.

    I can make them in any tooth configuration.
    And each sprocket will bolt up to the same adapter.
    For that price i could probably offer 2 sprockets and the adapter and spacers.

    The setup is made from steel plate and CNC Laser cut.
  4. Huntington

    Huntington Member

    what I could use is a 36 tooth sprocket for my Grubee HD axle. I think its a 2.5 center hole with non standard bolt pattern. Can you wipp one of them out for me?
  5. 210061741

    210061741 Guest

    I can do anything


    Yes i can do whatever you need.
    I will need a sketch or the measurements for the Center Hole Size.
    And i will need to know the measurements for the bolt pattern and hole sizes.

    You could even take the sprocket you have and set it on paper and trace out the pattern for the hole and mounting.

    Just remember the sprocket you get wil be only as good as the measurements you provide.

    Let me know what you think.
  6. Huntington

    Huntington Member

    I can do one better and provide an Autocad drawing.. just need to find some time. Ill put together a cad drawing with the bolt pattern and center hole..
  7. 210061741

    210061741 Guest

    Ok it will be perfecto then.
    attach the file and e-mail it to
    I have autocad so were good to go.
  8. Huntington

    Huntington Member

    almost good to go, I cant remove the **** sprocket from my hub. Making it hard to measure.
  9. 5-7HEAVEN

    5-7HEAVEN Guest

    That's Art!

    Great job!

    Can you make a disc brake hub adaptor with a freewheel mechanism-left hand thread?

    I'm doing a front-mounted chain drive, using #25 sprockets. My 54-tooth sprocket bolts directly onto the disc brake hub, but freewheel would be even better!
    Last edited by a moderator: Apr 30, 2010
  10. 210061741

    210061741 Guest

  11. 5-7HEAVEN

    5-7HEAVEN Guest

    The hub with threaded ends on both sides won't work. Both freewheels are right-hand threads, I believe. I have one of Staton's custom hubs with left-hand freewheel for the rear. I need the disc brake freewheel hub for my front wheel.
  12. Huntington

    Huntington Member

    Im confused, are you looking for a front hub with disc mount or rear freewheel with threaded (motor side) sprocket mount? A disc mount hub is easy to find, what is it your trying to do?
  13. 5-7HEAVEN

    5-7HEAVEN Guest

    My rear Staton hub will accept this sprocket with freewheel:

    Using an 18-tooth jackshaft sprocket gives me 3.611:1 ratio. Hook that up to a 5:1 gearbox, and gear ratio is 18.06:1.

    Up front is a 54-tooth sprocket bolted onto a disc brake hub. Using a 15-tooth sprocket on the jackshaft gives 3.6:1. Hook that up to a 5:1 gearbox gives 18:1 ratio.

    What I'm doing is modifying my Staton/BMP friction drive housings to chain drive. I'm using a 28-speed Giant Rincon mountain bike.

    A freewheel on the front disc brake hub would be the frosting on the cake.:detective:
    Last edited by a moderator: May 1, 2010