I was honestly trying to get you to provide more info for anyone who might actually be interested in buying it. You're absolutely correct that I have no intention of buying it, but if I did, for $400 or even $300 I'd want to know exactly what I was getting. And since I don't know very much about Phil Woods products, the only info I would have to go on would be what you provided in the OP, which doesn't seem like enough. Now that you've finally revealed that this hub is not designed to attach a pedal drive, that makes it illegal for use on a motor-assisted bicycle in many states, because no pedal drive makes it not a bicycle or a moped, therefore any bike with this wheel could not be registered. Furthermore, Troyg, I never said what I would do with this hub/wheel. I don't even know where you're getting that from. What I did say was that my custom wheel with moped hub, which the entire wheel cost about $100 in parts, can accept a pedal drive, therefore would still be considered a motor assisted bicycle. Some states have different laws, but the federal law defines mopeds and motor-assisted bicycles both as having operable pedals and being able to be propelled either by engine alone, engine and human propulsion together, or human propulsion alone. Therefore any motorized two-wheeled vehicle without an operable pedal drive is NOT a motor assisted bicycle or moped in most states. And to me, that seems like pretty important info when trying to sell something on a website for MOTOR ASSISTED BICYCLES. I wasn't intending to be disrespectful before, but since you both want to have an attitude, i'll give you my honest opinion. I don't think you're going to sell that hub here, and if you do, I think you'll eat a sizable chunk of what you paid for it. Saying you would sell it cheaper on ebay does not automatically imply that you would sell it cheaper here too, otherwise you would have hinted as much and you did not. Now I'm bored of this, so peace out and good luck.