MotorBicycleRacing
Well-Known Member
do you have any photos of your Dax 50 titan engine on a friction mount
thanks
thanks
Dax Titan 50 engine problem... looking for help
- Thread starter bird_e
- Start date
It wasn't fixed... The carb cleaning didn't resolve the issue. It still ran for **** and no power. So this is what I did. Since I had good spark, good fuel and a clean carb... I took off the valve cover to take a peak and inspect the valve adjustment, which should be about .05mm clearance...(I'm just be rough here).
HOLY CR*****P.... I had almost 2mm of clearance in the exhaust valve and 1mm or more on the intake. The thing was waaaaay out of whack from the factory...
Now the engine runs like a beast!!!!! I can't believe how powerful it is now. I'm a happy camper. I suggest if you feel like you are having performance issues with your 4stroke, check the valve clearance! It only takes a few minutes to do and WHAT a difference!
That's why it was spitting and popping out the carb, the exhaust valve wasn't opening enough to let all the spent exhaust of the cylinder, so when the intake opened it went out that way!
CHECK YOUR VALVES!!!!
HOLY CR*****P.... I had almost 2mm of clearance in the exhaust valve and 1mm or more on the intake. The thing was waaaaay out of whack from the factory...
Now the engine runs like a beast!!!!! I can't believe how powerful it is now. I'm a happy camper. I suggest if you feel like you are having performance issues with your 4stroke, check the valve clearance! It only takes a few minutes to do and WHAT a difference!
That's why it was spitting and popping out the carb, the exhaust valve wasn't opening enough to let all the spent exhaust of the cylinder, so when the intake opened it went out that way!
CHECK YOUR VALVES!!!!
