How to fit muffler

[User586]

I’m buying a muffler i think it’s got a 50mm diameter but I’m not sure how to fit it onto the pipe on my bike. I’ve put pictures of the muffler I’m buying and my bikes exhaust can someone give me any ideas on how I can fit this muffler to my exhaust

 

[GW's Motorized]

You can get reducers

 

[User586]

You can get reducers

What are those?

 

[GW's Motorized]

You can order them online. You will need to measure to find the size you need

 

[DieselTech]

I’m buying a muffler i think it’s got a 50mm diameter but I’m not sure how to fit it onto the pipe on my bike. I’ve put pictures of the muffler I’m buying and my bikes exhaust can someone give me any ideas on how I can fit this muffler to my exhaust

Are you putting that on a big block dodge? I think to keep your overall length short. You need to fabricate or have fabricated your own exhaust bell reducer.

 

[User586]

Are you putting that on a big block dodge? I think to keep your overall length short. You need to fabricate or have fabricated your own exhaust bell reducer.

Do you know how I can hide the current black muffler bit on the end and slip the new one over it

 

[DieselTech]

Do you know how I can hide the current black muffler bit on the end and slip the new one over it

Does your old black muffler bolt on? Can you unbolt it or loosen it to take it off? Thanks.

 

[User586]

Does your old black muffler bolt on? Can you unbolt it or loosen it to take it off? Thanks.

Nope it’s fixed

 

[DAMIEN1307]

Nope it’s fixed

I fail to see how a muffler that large would even be practical let alone the fact that it might effect the performance in a negative fashion on a 2 stroker motor.

 

[Amwicr]

I fail to see how a muffler that large would even be practical let alone the fact that it might effect the performance in a negative fashion on a 2 stroker motor.

I tried the flex pipe exhaust...the bike took a performance hit.

Now I run the mz65 clone that everyone hates, with the stock muffler welded on the end, with the lil tube removed from the end cap. Gained about 5 mph over my old bike, with far better acceleration. Same gearing. I'm still actually running slightly rich, but the performance is still good.