I'm looking it up on YouTube; and I cant seem to find any instructions on how I would do that. I'm also looking for cheap website links amazon/eBay for large 6 - 7 inch headlight/taillights.
Do I need any wire adaptor plug things for this? ^
Also when my stator/ignition recently took a poop while a sparkplug boot went bad/ smelling burnt rubber - causing bogs under 15mph & then finally wouldn't go over 5mph. Figured the cdi box/stator went bad all at once. Getting a new: cdi box/ + 12v stator/magneto. Is there a link anywhere for a cdi box with the gold input inside of the spark plug boot?
I have a question about the kill switch. I taped my kill switch away last time I replaced my gas throttle and I left the wires in. Will my engine run while my kill switch wires are disconnected from the cdi box wire inlets?
Do I need any wire adaptor plug things for this? ^
Also when my stator/ignition recently took a poop while a sparkplug boot went bad/ smelling burnt rubber - causing bogs under 15mph & then finally wouldn't go over 5mph. Figured the cdi box/stator went bad all at once. Getting a new: cdi box/ + 12v stator/magneto. Is there a link anywhere for a cdi box with the gold input inside of the spark plug boot?
I have a question about the kill switch. I taped my kill switch away last time I replaced my gas throttle and I left the wires in. Will my engine run while my kill switch wires are disconnected from the cdi box wire inlets?