spark plug cap question

Discussion in 'Electrical' started by kallsop, May 31, 2009.

  1. kallsop

    kallsop Member

    So I pulled off the spark plug cap and the fitting that clips onto the end of the plug was left behind on the plug. I removed it and stuck it back into the cap, then pushed the cap on, and the bike started and runs. Should I be concerned and order a new CDI or cap, or this is not a problem?

  2. BoltsMissing

    BoltsMissing Active Member

    NGK Plug Cap part number: LDO5F
    Note what or who NGK is, they were originaly a ceramics company in the 30's and produced superior quality ceramics. Then moved onto spark plugs aswell
    It's the ceramics they seem to have superiority over things that matter in high voltage circumstances, plugs and plug caps.
    Last edited: May 31, 2009
  3. srdavo

    srdavo Active Member

    your CDI is fine... the cap unscrews from the plugwire..... the wire will unscrew from the CDI, too.
  4. radrob

    radrob Member

    toss it and buy a car sparkplug wire 7mm and cut it to fit might cost 3 or 4 bucks