Super 32 Motorized Build

Discussion in 'Photos & Bicycle Builds' started by Leroybrown420, Jul 25, 2015.

  1. Leroybrown420

    Leroybrown420 Member

    Playing with a Super 32" Kent, love the "can't miss me" neon green. An 80cc 2 stroke should bolt right in. The large 32", 60 psi tires should absorb most of the cracks & dips. Did have to swap out the large 1" cruiser bars for a set of track bars. Think a 62 tooth sprocket is over kill for city living?

    PART_1437866305926_0725151617.jpg
     

  2. chain

    chain Member

    Man what color is that ? It's great !!!
     
    Leroybrown420 likes this.
  3. Leroybrown420

    Leroybrown420 Member

    It's power bait green.

    003643.jpg
     
  4. chain

    chain Member

    Is it the Garlic flavored !! yummmmy
     
  5. Timbone

    Timbone Active Member

    32" wheels??? Cool!
     
  6. wheelbender6

    wheelbender6 Well-Known Member

    The 32" wheels would ride nice on these cracked up concrete roads in Houston.
     
  7. Leroybrown420

    Leroybrown420 Member

    The stock 44 tooth pineapple sprocket set up will not bolt up and thought the 62 was overkill. Check out the size difference in size from the 62 tooth to the 44 tooth (1 black, 1 billet) and the 40 tooth sprockets. Should have a decent final gear ride ratio but concerned about the low end. I'll keep y'all posted.

    PART_1438371365120_0731151235.jpg PART_1438371721742_0731151241.jpg PART_1438372440799_0731151253.jpg PART_1438374222978_0731151323.jpg
     
  8. Leroybrown420

    Leroybrown420 Member

    This bike is just like building a 29er. Custom fuel tank mounts for the large diameter frame. Also had to pick up longer CDI mounting bolts.

    PART_1438478918751_0801151828.jpg PART_1438524033571_0801151908.jpg PART_1438524120160_0801151932.jpg PART_1438525207501_0801151941.jpg PART_1438525227767_0801152010.jpg PART_1438525261579_0801152059a.jpg PART_1438525287462_0801152101.jpg
     
  9. KCvale

    KCvale Motorized Bicycle Vendor

    Fun bike choice.

    Now get your angle grinder and whack of the ends of all those bolts at the nuts for a nice look.

    Just a note, you can use standoffs and 4 additional bolts to secure a tank on a fat bar with the brackets.

    GasTankStandoff.jpg

    Just a tip ;-}
     
  10. Leroybrown420

    Leroybrown420 Member

    The engine fits perfect. I used a lower profile mount so the stock NT carb and air filter would work and have room to upgrade the carb later if needed or wanted.

    $_12.JPG PART_1438526843502_0802150746.jpg PART_1438526694250_0802150744.jpg
     
  11. Leroybrown420

    Leroybrown420 Member

    Just using what I had laying around. A few old bolt did the trick. Thanks for the tip tho
     
  12. Leroybrown420

    Leroybrown420 Member

    The 415 chain form my kit was not long enough. Had to add a few extra links. Also ditched the chain tensioner and added a 1/2 link.

    PART_1438526641816_0802150743.jpg PART_1438526754574_0802150745.jpg
     
  13. Leroybrown420

    Leroybrown420 Member

    This bike towers my Sportster

    PART_1438568959844_0802151928.jpg PART_1438569022258_0802151929.jpg PART_1438569109645_0802151931.jpg
     
  14. Leroybrown420

    Leroybrown420 Member

  15. KCvale

    KCvale Motorized Bicycle Vendor

    Sweet look, nice and clean, but just a coaster brake?

    Come on fellow 'Zonie, no motorized bike is safe with just a coaster brake and you know it.
    If people start getting hurt around here you'll screw the pooch for all of us bud, and nobody wants that.
     
  16. Leroybrown420

    Leroybrown420 Member

    Finished Photos.

    IMG_1830.jpg IMG_1831.jpg IMG_1829.jpg IMG_1835.jpg IMG_1836.jpg IMG_1837.jpg IMG_1839.jpg IMG_1832.jpg IMG_1834.jpg IMG_1838.jpg IMG_1833.jpg
     
Loading...