Where to put boost bottle?

[Antonio3]

So where to put the boost bottle placement? saw some people saying on top frame some under the engine.

 

[Spare_Parts]

Back in the box.

 

[Sumsloppymeet]

exchange it for this
https://www.bonanza.com/listings/Sh...nBUEuJpee3CNEpWVIv03ubvo-FX_7EBhoCJF0QAvD_BwE

 

[JerboaJohn]

really tho, you don't have a lot of options where. it has to be close, horizontal, and above the intake.

without debating the value of a boost bottle, there's a good vid on why they don't generally work and how it could only possibly work at a specific rpm vs. it's volume on YouTube

 

[FNTPuck]

exchange it for this
https://www.bonanza.com/listings/Sh...nBUEuJpee3CNEpWVIv03ubvo-FX_7EBhoCJF0QAvD_BwE

Those are just as big a scam as a boost bottle.

They are just tiny whipped cream canisters and a nitrous cracker and too small capacity to be beneficial. Maybe $25 in parts and a few *grams* of nitrous in each charger. I did the math and with a 3hp jet(.009, which is the smallest jet you can buy and would allow the longest spray time) you literally get about 2.3 seconds worth of nitrous from an 8g can. Thats barely 2 seconds of <3hp to the wheel per can. A 5hp .012 jet is only 1.4 seconds, but I'm sure most chinagirls wouldn't like a 5hp shot of nitrous for too long before the rings are toast.

The hand drawn mspaint dyno graphs shouldn't fool anyone lol. If you want to run nitrous, you need a real nitrous kit with a solenoid, WOT switch, pressura gauge, and proper sized nitrous specific jets as the *minimum*.

 

[JerboaJohn]

someone start a thread asking about nitrous