Riggsz
New Member
YOU GET WHAT YOU PAY FOR! After installation I installed the proper amount of 10w 30 synthetic oil & proper low octane gasoline in gas tank. The motor started just fine & let the motor break in for 1/2 hr running straight at idle. Periodically also starting before road test. During said road test I ran the engine at low to mid rpm for a 1/4 mile or so then slightly increased rpm as to insure proper break in as I have purchased & installed over a dozen Huasheng 49cc 4 strokes in past. After increasing rpms the motor started cutting out slightly & smoke & oil was pouring out on exhaust & into carb from vent hose. I have ran tests on this engine after this mishap & it seems the oil rings in motor are faulty. Motor being under warranty still I called Gas Bike.Net where I purchased the kit & after 40 attempts to speak with support tech or to file a warranty claim no such luck. Also emailed support with no reply & they are ignoring the fact that they do not want to deal with this problem. I decided to repair engine myself & have found broken rings, compression ring installed upside down, & the piston installed backwards with arrow facing towards exhaust. After honing scratches from cylinder & new rings properly installed with piston facing in correct alignment the motor is running great. The transmission with it's one way 10 tooth sprocket is another story lol Ha!