Media added by dinoseer

Navigation

  1. Motorized Bicycles 1K
  2. Engines & Diagrams 67
  3. Antique Motorized Bicycles 44
  4. Videos 13
  5. Electric Bicycles 1
  6. Forum Pictures 68K
Browse albums

Media comments

Media statistics

Categories
6
Albums
1,661
Uploaded media
82,426
Embedded media
13
Comments
3,873
Disk usage
13.5 GB
Next I carefully soldered the little tiny copper wire on the Top of the Winding/Coil back to the Metal Arm of the Magneto Loop...

Next I carefully soldered the little tiny copper wire on the Top of the Winding/Coil back to the Metal Arm of the Magneto Loop...

  • 0
  • 0
Added a piece of Shrink Wrap (blue) for added protection. Next is to put it back on the Motor. Motor started right up, so I took her for an 18 mile

Added a piece of Shrink Wrap (blue) for added protection. Next is to put it back on the Motor. Motor started right up, so I took her for an 18 mile

  • 0
  • 0
Magneto Loop Coil removed. Next we do away with the White Wire and replace the Blue Wire with a 10 guage Wire. I reused the Black Ground Wire.

Magneto Loop Coil removed. Next we do away with the White Wire and replace the Blue Wire with a 10 guage Wire. I reused the Black Ground Wire.

  • 0
  • 0
The White Wire's Insulation is damaged here, possibly contributing to not working...

The White Wire's Insulation is damaged here, possibly contributing to not working...

  • 0
  • 0
Look carefully on the white plastic top of the Winding/Coil. The little tiny copper wire has broken at the solder to the Top Arm...

Look carefully on the white plastic top of the Winding/Coil. The little tiny copper wire has broken at the solder to the Top Arm...

  • 0
  • 0
Remove the 4 screws holding the Magneto Cover. Then the 4 screws holding the Magneto Loop to the Motor...

Remove the 4 screws holding the Magneto Cover. Then the 4 screws holding the Magneto Loop to the Motor...

  • 0
  • 0
Reused heat shield sleeve...

Reused heat shield sleeve...

  • 0
  • 0
I reused the original Black Ground Wire, then soldered a 10 guage Wire in place of the Blue Wire on the top Terminal coming out of the Coil...

I reused the original Black Ground Wire, then soldered a 10 guage Wire in place of the Blue Wire on the top Terminal coming out of the Coil...

  • 0
  • 0
We are going to remove the Magneto Loop Coil/Winding and see if we can repair it...

We are going to remove the Magneto Loop Coil/Winding and see if we can repair it...

  • 0
  • 0
My Service Bicycle.

My Service Bicycle.

  • 0
  • 3
DSC08685

DSC08685

  • 0
  • 2
Ordered a Glass Fuel Filter to replace inferior plastic/paper type that came with kit.

Ordered a Glass Fuel Filter to replace inferior plastic/paper type that came with kit.

  • 0
  • 0
Now to mount the throttle.

Now to mount the throttle.

  • 0
  • 0
DSC08689

DSC08689

  • 0
  • 0
Instead of drilling more holes in the frame of the Cargo-T, I went with making an adapter plate to mount the Front and using the supplied plate to mou

Instead of drilling more holes in the frame of the Cargo-T, I went with making an adapter plate to mount the Front and using the supplied plate to mou

  • 0
  • 1
Tried to gently bend curved portion of Exhaust, but was risking crimping tubing.

Tried to gently bend curved portion of Exhaust, but was risking crimping tubing.

  • 0
  • 0
Another view of the drilled hole.

Another view of the drilled hole.

  • 0
  • 2
Rear Motor Mount using supplied adapter plate, u-bolt and spacer in kit.

Rear Motor Mount using supplied adapter plate, u-bolt and spacer in kit.

  • 0
  • 0
Still have to mount Chain Guard.

Still have to mount Chain Guard.

  • 0
  • 0
DSC08670

DSC08670

  • 0
  • 0
I made a similar adapter plate from 1/4" Steel Bar and a 2" U-bolt for the Front Motor Mount

I made a similar adapter plate from 1/4" Steel Bar and a 2" U-bolt for the Front Motor Mount

  • 0
  • 0
Advertising Space made from part of an Antique Theater Seat, made from 100 year old Yellow Birch

Advertising Space made from part of an Antique Theater Seat, made from 100 year old Yellow Birch

  • 0
  • 0
Gas Tank mounted well to Rear Rack with the brackets and hardware supplied in kit.

Gas Tank mounted well to Rear Rack with the brackets and hardware supplied in kit.

  • 0
  • 0
Exhaust completed.

Exhaust completed.

  • 0
  • 0
Back
Top