carburator problems

Discussion in '2-Stroke Engines' started by etienne810, Nov 19, 2009.

  1. etienne810

    etienne810 New Member

    I bought this carb with the square air filter with larger jets. It worked fine for about 2 months. Now its remaining at a high rpms after I give it full throttle and let off. I it just stays at a high rpm like its still full throttle. The throttle or jet is not stuck open and i adjust the float so there was less gas in the carb. It still runs like its full open after I give it full throttle and let off. I also changed the jet and needle and still no change. Any ideas or should I just get a new carb? My friend had the same problem and he just got a new carb and that solved the problem. PLEASE HELP!:bigcry:
     

  2. biketec

    biketec Member

    Air leak!!
     
  3. etienne810

    etienne810 New Member

    i copper gasketted everything but I'll redo it. I don't think its that tho.
     
  4. biketec

    biketec Member

    Spray something all around it and if it dies its air it could be up on the car/intake joint?
     
  5. etienne810

    etienne810 New Member

    I sprayed some starting fliud and there was a little change so I removed the air intake gasket and used some copper gasket maker and now i'm waiting for it to dry to see if that solves the problem. :banghead:
     
  6. etienne810

    etienne810 New Member

    Still no luck:confused:
     
Loading...