clutch shaft replacement/adjustment help?

[jatgm1]

the oil is in the hole under the brake cable holder. basically onto the spring. and its oil for my yamaha zuma's transmission, so its thick, also, the spring is really tight now so i dont think that a little slippage is an issue, my problem was originally that i could rev it and not move the bike. i can deal with a little slippage until the oil burns off. and i didnt get to try it, but i have work soon so im going to test it before i leave and if it works just take it to work.

 

[jatgm1]

ok, so i tested it, and it works, but slips just a tiny bit, also on an unrelated matter i realized the exhaust has a smaller output than the one i got with the kit, so i drilled out the exhaust a little, plus this needs the right size jets and an idle screw since i lost the one that came with it.