B bungus366 New Member Local time 10:53 AM Joined Dec 3, 2022 Messages 2 Dec 3, 2022 #1 I've tried every combination of my old and new parts, I've even tried swapping around the wires, what am I doing wrong?
I've tried every combination of my old and new parts, I've even tried swapping around the wires, what am I doing wrong?
Wyatt. A. Well-Known Member Local time 3:53 PM Joined Sep 19, 2022 Messages 318 Dec 3, 2022 #2 Did you ever have spark before? I would suggest new plug wire.
B bungus366 New Member Local time 10:53 AM Joined Dec 3, 2022 Messages 2 Dec 3, 2022 #3 Wyatt. A. said: Did you ever have spark before? I would suggest new plug wire. Click to expand... No I've never had spark. Is it possible for the spinning magnet in the magneto assembly to be installed backwards?
Wyatt. A. said: Did you ever have spark before? I would suggest new plug wire. Click to expand... No I've never had spark. Is it possible for the spinning magnet in the magneto assembly to be installed backwards?
Wyatt. A. Well-Known Member Local time 3:53 PM Joined Sep 19, 2022 Messages 318 Dec 3, 2022 #4 I just found this.
Chainlube Well-Known Member Local time 3:53 PM Joined Jan 5, 2020 Messages 10,303 Location Kelowna BC Dec 3, 2022 #5 Wyatt. A. said: I just found this. Click to expand... That's a good one, some other characters around here could benefit from that one.
Wyatt. A. said: I just found this. Click to expand... That's a good one, some other characters around here could benefit from that one.
DieselTech Well-Known Member Local time 5:53 PM Joined Sep 18, 2021 Messages 7,113 Dec 3, 2022 #6 What do you guys reckon that bolt is coming out of the transfer port on the block? A pulse port for a saw carb?
What do you guys reckon that bolt is coming out of the transfer port on the block? A pulse port for a saw carb?
Chainlube Well-Known Member Local time 3:53 PM Joined Jan 5, 2020 Messages 10,303 Location Kelowna BC Dec 3, 2022 #7 DieselTech said: What do you guys reckon that bolt is coming out of the transfer port on the block? A pulse port for a saw carb? Click to expand... My guess would be a hole was drilled to mitigate a crack from traveling, or nitros.
DieselTech said: What do you guys reckon that bolt is coming out of the transfer port on the block? A pulse port for a saw carb? Click to expand... My guess would be a hole was drilled to mitigate a crack from traveling, or nitros.
Wyatt. A. Well-Known Member Local time 3:53 PM Joined Sep 19, 2022 Messages 318 Dec 3, 2022 #8 bungus366 said: No I've never had spark. Is it possible for the spinning magnet in the magneto assembly to be installed backwards? Click to expand... Have you tried unscrewing the spark plug wire to make sure the metal wires inside are making contact with the screw?
bungus366 said: No I've never had spark. Is it possible for the spinning magnet in the magneto assembly to be installed backwards? Click to expand... Have you tried unscrewing the spark plug wire to make sure the metal wires inside are making contact with the screw?