New kit problems!

Discussion in 'General Questions' started by Quinnmca, Apr 13, 2016.

  1. Quinnmca

    Quinnmca New Member

    My 66cc engine kit came in from ebay today. Everything has gone well until now. One the clutch doesn pull in toward the engine it doesnt even disingage the engine. 2. I put the chain hanging off the engine sprocket and pulled to see if the engine sprocket would move and it wouldnt. I am wonderinv if the problems are related and the enginw is locked up.
     

  2. earthmann

    earthmann New Member

    Try taking the cover off and rotating the clutch arm
     
  3. Greg58

    Greg58 Member

    When you say the clutch doesn't move toward the engine are you talking about the arm not moving? If so the cable is not adjusted right. Also remove the spark plug and try of rotate the engine by moving the sprocket or putting the chain on and rolling the bike around, when rolling the bike you should hear the piston cycling up and down.
     
  4. Quinnmca

    Quinnmca New Member

    The clutch arm is supposed to be pulled i toward the cable but instead it goes the other way
     
  5. crassius

    crassius Well-Known Member

    really hard to push it with fingers - try again
     
Loading...