removing jet from HS 142f carb for resizing

Discussion in '4-Stroke Engines' started by BakkenRide, Aug 11, 2015.

  1. BakkenRide

    BakkenRide New Member

    Hi, i bought an aftermarket aircleaner, and after putting it on determined i will have to drill out jet on the stock HS carb, i got the numbered wire gauge bits, but am wundering if i can just unscrew the jet out of carb , or do i need to take carb apart to get jet out.
    thanks to anyone who can give me a little info before i start messing with one of the 2 carbs i have.
     

  2. COBikeMkr

    COBikeMkr New Member

    Carb question

    49cc-main-jet.jpg You need to take the carb off of engine and then unscrew the screw holding the bowl reservoir and then unscrew the main jet and drill out. heres a pic of inside of HS 142f.
     
  3. BakkenRide

    BakkenRide New Member

    thank you!
     
Loading...