Schwinn Landmark build help please

Discussion in 'General Questions' started by modchris, Oct 1, 2011.

  1. modchris

    modchris New Member

    Hello i just bought the Schwinn landmark. I need to order the engine mount from sick bikes but what sizes do i need? options are Down tube width:and Engine Stud width:. I have the Silver Slant 66cc kit. is there anything else i will need? here is the sickbikes motor mount that i think i need

    http://www.sickbikeparts.com/catalo...ducts_id=85&osCsid=2s5571vonin13r671m3srvkq24

    i just want to make sure i get all the right parts. Thanks Chris
     
    Last edited: Oct 1, 2011

  2. Al.Fisherman

    Al.Fisherman Active Member

    I see that China Mart has a special of $100.00. I myself prefer a Cruiser and have built a couple of them.

    Here is one I built.. I made the front mount, it's high as that was the way the buyer wanted it. The mount can be just about anywhere you need it, just customized.

    Before mounting you might want to read this.

    http://www.mediafire.com/?k14v8jfej4nj434
     
  3. modchris

    modchris New Member

    Thank you... that kinda is cruiser though.
     
Loading...