What is the perfict beach cruiser for a 2 stroke motor?

[Al.Fisherman]

Heres a couple more pics. Its kind of hard to see, but I bent 2 Simpson strong ties to fit from engine to muffler clamp on tube - drilled 2 holes in ties to bolt to engine...was pretty easy actually..............

Ok now I see how it worked. Here is the last one I made.

 

[Apachekid]

Simpson strong ties worked for me since I didnt have any scrap metal heavy enough for front mount. Picked em up cheap at HomeDepot, May not have had to double up, but that engine does not move. Id use them again for extra large mount area, or for stretch cruiser................

 

[SdCruizer]

Just dont get my bike
the tank, coil wont clamp on I had to drill and tap the brackets directly to the frame
the rear mount was almost the correct size, took alot of filing by hand to open it up
the front mount was too small, that tube is alot fatter too

I only bought it because of how it looked

 

[Al.Fisherman]

Just dont get my bike
the tank, coil wont clamp on I had to drill and tap the brackets directly to the frame the rear mount was almost the correct size, took alot of filing by hand to open it up the front mount was too small, that tube is alot fatter too
I only bought it because of how it looked

Kind of a ole thread, I'm sure he has bought a bike for his engine between October and today. I should hope. Besides this was his last post.

 

[SdCruizer]

I know, I go back through all the posts trying to lean things and then forget about the dates, but I figure if you dont update the posts then this is what happens

this is my way of searching, I start from new to old