49cc decal

Discussion in 'General Questions' started by darwin, Feb 9, 2015.

  1. darwin

    darwin Well-Known Member


  2. birdmannn101

    birdmannn101 Member

    That is were I got mine from. Looks great on the engine too.

    IMG_20140725_112445.jpg
     
  3. darwin

    darwin Well-Known Member

    I like that seat, where is it for sale at? What motor is that, 212cc HF predator?
     
  4. troyg

    troyg Member

    +1.That's not a saddle, that's a seat, looks very comfy.Where and how much??
     
  5. birdmannn101

    birdmannn101 Member

    I heard too many complaints of vibrations on the Predator 212cc and I was tired of 2 cycle engines so I used the 25% off coupon and picked up a new 79cc engine for $75. This is which engine I have on this bike.

    It is funny that you guys mentioned that you liked the seat. It is set up to be either a bicycle seat or a chopper seat with 2 different attachments. I bought it off Ebay a few years ago (handmade) for $50 and tried to sell it for $50 on Craigslist and Ebay when I was still riding my 2 stroker but had no takers. So, I posted here on one of the motorbike forums and still had no takers so I put it on my new Huffy bike and ride with it all the time. Pretty comfortable seat.
     
  6. Sgt. Howard

    Sgt. Howard Member

    Dude! That's the Huffy Nel Lusso/Panama Jack frame! They tend to break at the frame welds, so keep an eye on it... maybe with the four-stroke, it won't because of less vibration, but be aware that those frames break when kept in pedal only configuration.
     
  7. birdmannn101

    birdmannn101 Member

    Sgt., When you say, "kept in pedal only configuration." what does that mean?
    Thank you for giving me "heads up" on the Nel Lusso frame.
     
  8. Sgt. Howard

    Sgt. Howard Member

    Even those who have NOT put a motor on that frame have witnessed fractures of the upper back stays where the rack is welded on- the Cranbrick frame is welded in a jig, then stress-relief tempered in the same jig- that rack was welded on AFTER this treatment, making the areas around those welds brittle! EVEN USED AS A PEDAL BIKE ONLY, THE FRAME IS FRAGILE!
    .... fortunately, replacement frames are cheap! Go with a standard frame and bolt on a standard rack.. or weld together bolt-mount fittings on THAT rack after you saw it off THAT frame!
     
    birdmannn101 likes this.
Loading...