graggy
Active Member
I’m building my first bbr 80/66 cc bike. My question is when I start my bike for the first time when the engine starts should I pull the clutch in and just run the motor at a high idle and vary the rpm some for a while so the engine isn’t under load pulling the bike Or should I just ride it around slowly and let the motor run pulling the bike and my butt around? I see a lot of different opinions on the oil mix for breaking in. I know not to use synthetic oil for break in. I saw Damien‘s post for how much oil per gallon for break in and going to stick with that. What do you measure 5.12 ounces of oil in?