Skyliner70cc
Active Member
- Local time
- 9:02 AM
- Joined
- Nov 17, 2007
- Messages
- 1,338
Read my tips and you may realize that the studs are backing out of the engine and tightening the top of the studs may cause some serious damage when you rip those studs out.
I'd pull the head and loctite the studs or JB weld them into the block. The studs WILL eventually back out if you dont' do this.
I'd pull the head and loctite the studs or JB weld them into the block. The studs WILL eventually back out if you dont' do this.