Identify piece

Discussion in '2-Stroke Engines' started by chupwns, Sep 5, 2013.

  1. chupwns

    chupwns New Member

    I took my cylinder body off of the engine to remove a bolt that was stuck. While hitting the body, a small black metal piece (that definitely has a purpose) fell out. Could someone identify what it is and how to get it back in?
     

  2. MotorBicycleRacing

    MotorBicycleRacing Well-Known Member

    please post a pic cause I am curious.....
     
  3. HeadSmess

    HeadSmess Well-Known Member

    :worthless:

    plenty of black bits, plenty of metal bits.

    and plenty of different engines you might have pulled apart to find such a thing on...
     
  4. Fabian

    Fabian Well-Known Member

    I can't imagine that a little black circlip holding the wrist pin in place could be that much of a problem (should it not be where it's supposed to be), but if you reassemble the top end and hear a scraping sound, it's most likely going to be the wrist pin cutting a boost port into the cylinder wall. :whistling:
     
  5. crassius

    crassius Well-Known Member

    could be a piece of broken ring
     
  6. zippinaround

    zippinaround Active Member

    what were you hitting it with? my guess would be a piece of broken ring too! a pic would be useful! also what bolt was stuck that required removing the jug?
     
  7. chupwns

    chupwns New Member

    PIcs of piece

    hey sorry for the late response, here is a picture of the piece

    part.JPG
     
  8. chupwns

    chupwns New Member

    I was hitting it with a hammer :) guess i pulled a Jeremy Clarkson there
     
  9. chupwns

    chupwns New Member

    i put loctite on the bolt, but some of it bonded to the stud wall :/
     
  10. HeadSmess

    HeadSmess Well-Known Member

    so, with the possibility of.... several thousand different manufacturers of small engines, you expect us to be able to name not only the manufacturer of the engine YOU STILL HAVENT SHOWN OR NAMED, but also to be able to refer to the thousands of service manuals and exploded diagrams stored in our heads, to identify one small part?

    one small part that hasnt been pictured too well, half of its obscured by a dirty fat finger!

    so.


    whats the engine? im assuming its a tanaka or something similar.

    im even having a vague feeling that its actually a fourstroke...


    sorry to come across as rude, but why cant people think a little? we cant give information, if we dont RECEIVE information.

    every second thread "my engine dont go. whats wrong?"

    we cant answer those moronic questions. what engine? 2 4 or petrol? rotor even? or a freakin turbine?


    all i ask? engine brand. model. capacity if known. pictures. nice clear pictures. we arent you. we dont know how you think or what goes through your head, what you know and what you dont....




    :rant: :jester:
     
    Last edited: Sep 6, 2013
  11. zippinaround

    zippinaround Active Member

    definitely not a piece of broken ring anyway! but i don't recognise it so its not a ht anyway.
     
  12. HeadSmess

    HeadSmess Well-Known Member

    it also looks like plastic and resembles the cap they put over the mixture needles....
     
  13. chupwns

    chupwns New Member

    Ahhemmm my dear sir,

    It pains me to give information to one so rude as yourself, but it is a 66cc flying horse engine with an expansion chamber attached ( as of now) to the cylinder body
     
  14. chupwns

    chupwns New Member

    It is metal and seems oddly placed. In all my ht experience I have never come across this
     
  15. zippinaround

    zippinaround Active Member

    so it is a ht? is it a part of your bike maybe? hard to tell from that pic is the end your not holding threaded and is the end your holding round?
     
  16. chupwns

    chupwns New Member

    more pics

    photo(1).JPG photo(2).JPG photo(3).JPG photo(4).JPG photo(5).JPG photo(1).JPG photo(2).JPG photo(3).JPG photo(4).JPG photo(5).JPG

    here are some more pics.
     
  17. MotorBicycleRacing

    MotorBicycleRacing Well-Known Member

    A disgruntled Chinese motor basher together must put that in your motor if it even came out of it.....:jester:

    No part like that is on a 66 cc motor or kit.

    Looks like a part of a carb.
     
  18. chupwns

    chupwns New Member

    yes i agree, it does look like it came from a carb, yet my carb is fully intact. It puzzles me to no end
     
  19. zippinaround

    zippinaround Active Member

    looks kinda like a clutch actuator to me. do you have any other bikes or engines lying around nearby?
     
  20. chupwns

    chupwns New Member

    I dont have any other bike around this one, and my clutch is intact :? idk i am just going to leave it out whem i put it back together and hope for the best :) thanks for all the help guys
     
Loading...