Define what the "this" is? I am assuming the threads of that hole for the cover bolt? They look like it was cross threaded, or lightly stripped. Depending on which, if that even is the issue, there are solutions.
That hole is the back side of the case bolt, it shouldn't effect running as it doesn't expose the crank case to atmospheric pressure, just to be safe though you could plug it up with some jb weld or good epoxy.
That hole is the back side of the case bolt, it shouldn't effect running as it doesn't expose the crank case to atmospheric pressure, just to be safe though you could plug it up with some jb weld or good epoxy.
Gas Engine Bottom End Crankcase Crank Case 8mm studs engine parts for 2 stroke 66cc/80cc, NOT FOR YD100 KIT. M8 bolts to cylinder required on the crankcase crank body end;.
www.ebay.com
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.