I laced the OCC wheel with Sapim .105 ss spokes in black finish. I chose a 2x pattern for strength and used ss nipples. The 36 tooth sprocket require
People trash these carbs, but I haven't had one problem. The original air cleaner was replaced with this cannister one which is free flowing and seeme
A fan of springer front ends, I had to add one. I fabricated it from hardware springs and 3/4" heavy-walled conduit. The top mount is bolted to the up
The 185mm Shimano disc required an adapter as well since OCC wheel hubs are not disc ready. The adapter required some drilling, but was simple to inst
I laced the OCC wheel with Sapim .105 ss spokes in black finish. I chose a 2x pattern for strength and used ss nipples. The 36 tooth sprocket require
I've always like OCC rear wheels so I decided to install one on this build. To add strength I had the seam welded. Since the distance between the drop
The springer seat was fabricated from a heavy aluminum skillet from my father-in-laws restaurant. The heavy ss handle provided a perfect mounting stra
After experiementing with engine placement, I found that a slightly forward position provided the right angle for the primary drive chain, and provide
S

I laced the OCC wheel with Sapim .105 ss spokes in black finish. I chose a 2x pattern for strength and used ss nipples. The 36 tooth sprocket require

There are no comments to display.

Media information

Album
Stiletto Bobber
Added by
Scootmeister
Date added
View count
470
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top