Next I carefully soldered the little tiny copper wire on the Top of the Winding/Coil back to the Metal Arm of the Magneto Loop...
Remove the 4 screws holding the Magneto Cover. Then the 4 screws holding the Magneto Loop to the Motor...
The White Wire's Insulation is damaged here, possibly contributing to not working...
Magneto Loop Coil removed. Next we do away with the White Wire and replace the Blue Wire with a 10 guage Wire. I reused the Black Ground Wire.
Next I carefully soldered the little tiny copper wire on the Top of the Winding/Coil back to the Metal Arm of the Magneto Loop...
Reused heat shield sleeve...
Added a piece of Shrink Wrap (blue) for added protection. Next is to put it back on the Motor. Motor started right up, so I took her for an 18 mile
D

Next I carefully soldered the little tiny copper wire on the Top of the Winding/Coil back to the Metal Arm of the Magneto Loop...

There are no comments to display.

Media information

Album
2 Stroke Magneto Coil Loop Repair/Upgrade
Added by
dinoseer
Date added
View count
829
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top