broken plug wire

Discussion in 'Electrical' started by daveet66, May 23, 2016.

  1. daveet66

    daveet66 Member

    So head bolt snaps I replace all four go to start it no spark so I pull off plug wire and it breaks right where the spark plug cap and the wire meet! Anyway to reconnect it?

  2. 45u

    45u Active Member

    Yes replace the wire. The wires just screws in to the CDI and the plug cap if you have that style cap.
  3. crassius

    crassius Well-Known Member

    or replace the cap if wire is still long enough
  4. 45u

    45u Active Member

    If the wire broke that easy I would replace the whole wire.
  5. daveet66

    daveet66 Member

    I spliced wire where boot was put wire on spark plug now I get no spark! Did I do something wrong here?
  6. KCvale

    KCvale Motorized Bicycle Vendor

    Did you use a torque wrench to tighten your head back on?
    Or just do it by 'Feel'?

    Chances are your problem is directly related to changing the jug bolts.