For Sale

All engine upgrades by Quenton Guenther. Chrome luggage rack, chrome air cleaner, chrome battery cover, chrome belt cover, new tires with thorn proof tubes, rear axle kickstand, motorcycle risers and handlebars (original goosekneck and handlebars go with bike). New handlebars and rear axle kickstand not shown in photos. Starts first kick and purrs like a kitten. Everything works, but battery is 4 years old and probably needs replacement. Very dependable and a blast to ride, but too many projects and bikes. Black saddlebags NOT included in sale. Asking $1500 or trade for small Italian or other vintage MC. Pickup only, no shipping. PM me for details.

I have three gas powered bicycles and quite a few extra parts. These all have the 1920's era board tracker inspired cruiser look. Low, skinny, and quick. Vintage style with modern components and great reliability. Bike #1 - $400 obo - includes the following * Cimatti Tank * Board track style handle bars * Springer Forks * 28" 32 spoke Premium wheel set * Brooks Saddle * Front Brakes * Board Track Seat Post * Bi-pod Kickstand * 2-stroke SkyHawk Motor. * Internal Wiring * Welded motor mounts and tensioner mount * Dark Blue Powder coated * 36 tooth rear sprocket for top speed * NGK plugs and upgraded plug wires It has about 25 hours on it. It's broken in. This is a quality build. Bike #2 - I also have another flat...

well after 1500 miles my hoot Transmission is on it's way out . I had the kit for 8 months now. I kept the chain from stretching with hi temp synthetic gear grease which I would check and repack every month, this time the chain is stretched so I need a new gearbox/Torque converter for a Bikeberry 49cc Flying Horse 5G 4 Stroke Huasheng 142 engine kit. I have up to $150.00 to spend I'm on Disability and make less than $650 a month so I can not afford a $300.00 gearbox/Torque converter. If you have a good gearbox/Torque converter (even a scratch and dent as long as it works had has all the parts needed will be fine) at a good price please contact me at samdallas214@hotmail.com Give me a good price and a good gearbox/ Torque...

This is an all original 1952 Green Whizzer Sportsman in unrestored condition. This Sportsman is equipped with the high performance 138cc 4-cycle motor. Here is a chance to own a classic piece of Americana. By appointment and local pick-up only. I'm in the Los Angeles area and will meet you at a local bike store. Starting price is set at $4995 OBO. Be free to ask questions or request more photos. Good Luck!

Who or where can I get a 3L/ + tank?

Motoped with 150cc Piranha electric start engine whole bike wieghs 120lbs with fuel Motoped with pedals and footpeg kit , only one hour on the engine only a few more on the chassis Has Fox 40 rc2 front fork Fastace rear shock , electric start , Cal Bike lic plate Philip 415 507-0906 List Date: 3/28/2014 For more info, click here to view the original listing: Motoped with 150cc Piranha electric start engine whole bike wieghs 120lbs with fuel -------------------------------------- This item is no longer available. --------------------------------------

You need to check this out, 8ci of pure power and reliability. http://compare.ebay.com/like/170927632169?_lwgsi=y&ltyp=AllFixedPriceItemTypes&var=sbar#

I had some extra money and built this on a whim. The $2,200 frame is the strongest, coolest frame with pedals I have motorized so far, and I have built some really cool MB's. I have been doing shipping via Uship.com to get intact MB's delivered and if you are West of the Mississippi total delivery intact ready to hop on and ride of the truck has been $250 to $350. It's not cheap but it IS awesome. Contact me from my web sites Contact Form if interested, and this is the link to it's build topic if you have questions. http://kcsbikes.com/topic.asp?TOPIC_ID=771

I am selling TEN 43cc 2 stroke engines. I have ten available. If you look around they sell for more than $150 +. They do not have a gas tank or pull starter but they do have the electric start. You can sell the parts alone for more than $40. Email me for more information or if you want them. Also I am located in Orange County, CA Josh

hey guys, I am new to this site so I don't exactly know how to upload pics yet......but I have a brand new motoped from santa cruz/shuttle buddy......built 8 months ago.........in pristine condition...all jet black , completely dressed in billet aluminum parts.....including a billet exhaust , gas cap , skid plates , grips , oil dip stick , billet racing cdi..........it has a 125 cc lifan semi auto race edition engine with a 26 mm mikuni carb.....also had a 3 inch rear wheel made to accommodate wider tires.....and a custom made rocker style gear shifter ............it is a one of a kind bike !!!!!!! built by pirate cycles....I paid $4400 for it about 8 months ago and spent another $1500 on parts dressing it up ...........last month I...

http://www.ebay.com/itm/Mitsubishi-TU43cc-Brush-Cutter-Blow-Out-Sale-Free-Shipping-/280949255764?pt=US_Outdoor_Power_Equipment&hash=item4169e16e54#ht_372wt_1091 Cheers, Lowracer-

This is a Whizzer motorbike that has been completely customized by Performance Whizzer. This bike was assembled with special attention given to the slightest detail. Many custom upgrades were incorporated to enhance the performance and safety of this 60+ mph motorbike. Engine updates and modifacations include a new NE-5 cylinder barrel,with larger valves and cooling fins. The cooling fins were milled to resemble the classic 300 series engine barrel. Intake and exhaust ports, along with the valve pockets were enlarged and recontoured. NE-5 cylinder head was milled and reshaped for better flow and combustion. Needle bearing crank, new piston, pin, rings and gaskets. High lift cam and special polished mushroom lifters were installed...

Hello all..Please allow me to introduce myself. My name is Rex, retired, and 65 years young, New member here from New Orleans LA. About 4-5 months ago (on a whim) I bought a Gettobike.com motorized bicycle...This is the exact bike pictured on the website, with all the performance options...It goes 60 mph! Predator motor, has all the mods, that delivers 12hp instead of 6.5 as is in stock condition...Has high performance cam, stronger springs, racing carburator, machined billet flywheel, and header pipe. Bike has no more than 30 minutes run time, so it's literally brand new. Paid $2500 brand new.. I'll take $1500 firm...Cash, Pa;yPal, or certified money order Bit off more than I can chew for a 65 year old man is why I have to sell it...

New billet head for NE5 .6061 Billet Aluminum custom CNC ,20cc Pocket , 30% more fin area.All top Quality. $300.00 plus shipping...Bill 360-601-4486

Hey there people of the internet I have a question to ask. I am ready to build a motorized bike but my problem is that I have to earn some money so I can build one. Due to the fact I have no support from parents (i'm 16). I thought it would be great if I make a business out of it and just built and sell bikes so I can earn myself enough money to build my own for myself. As I estimated I would be asking for 995 dollars per bike because I am going to sell it with a 4 stroke engine, a boost bottle, and wheels dedicated for motorized bikes. What I can also offer is to build a bike upon your preference and request and give you an estimation of how much it would cost to build and how much time it would take to build.

I have a complete Meco Aviator Jet welding set up, cutting head and 3 cutting tips, 3 welding tips, hoses and Meco (older) regulators. This torch is no longer made, but is probably one the finest small scale gas torches ever made. Made in St. Louis, and living there, I've been lucky to come across 5-6 of these over the past several years. I've sold these on ebay for $125-$175. This is only the second welding handle, cutting head and regulators complete welding kit I've found. Tips and certain parts are still available www.tinmantech.com This is not a collectors item, but a great working design for chrome molly/tubing, sheet metal welding or brazing. Those of you who are familiar with this torch will know this is a very good deal. I'd...

I'm looking for a used whizzer or similar rear drive v-belt sheave with hardware. Rusty or painted finish preferred over chrome. Thanks.

When I move back to Texas I will be offering fully assembled motorized bikes that have everything needed to be street legal. You can see what all they will have at www.dragonfly75.com/jaguar/mbikes.html

Never seen a bike like this, has gadgets that leave me clueless but its cool as hell. http://reno.craigslist.org/bik/3908367609.html

http://inlandempire.craigslist.org/bik/4426534638.html Forum members price 650.00 I will not ship but Paypal is fine. 909-991-8495