MarkM
New Member
Just finished my very first build and I can't keep my chain on the sprocket long enough to try and fire up my engine. It keeps coming off the chain wheel. I start off well with the correct tension. I pedal my bike, dump the clutch and the chain comes off the wheel and the chain tensioner gets twisted down 180 degrees. Then I have to dig the chain out from between the spokes and the chain wheel. I've done this three times and can't figure out how to keep the chain on trac.
I notice that the master link makes a noise or bumps as it goes through the tensioner and on to the chain wheel and counter sprocket. Could the master link be a problem? Appreciate any tips, thanks, Mark M
Chain: #415
I notice that the master link makes a noise or bumps as it goes through the tensioner and on to the chain wheel and counter sprocket. Could the master link be a problem? Appreciate any tips, thanks, Mark M
Chain: #415
Last edited: