I can't get my chain from my sprocket to my engine lined up so my chain constantly comes off the sprocket. I also can't use the chain without the tensioner otherwise the chain would be too loose and if i take a link off it will be too tight. what do i do???
chain and sprocket help!
- Thread starter jmr3394
- Start date
arkives1
Member
Chain and Sprocket Help
You might be able to go to a slightly smaller sprocket and then use a shorter chain. I don't know what the change would be per tooth of sprocket change. You'd lose some torque going to a smaller sprocket.
You might be able to go to a slightly smaller sprocket and then use a shorter chain. I don't know what the change would be per tooth of sprocket change. You'd lose some torque going to a smaller sprocket.
I know of the problem you are talking about. Trust me when I say this. JUNK that chain that come with the kit and go to the hardware store and buy the #41 chain. This chain is wider and is far more forgiving to slight misalignments.
Believe me you do not want to have the chain pop off and lock up the wheel at 25mph down the road.
Believe me you do not want to have the chain pop off and lock up the wheel at 25mph down the road.
