jackofalltrades
Member
- Local time
- 11:09 AM
- Joined
- May 29, 2008
- Messages
- 79
I used an old Schwinn derailleur and mounted it with a muffler clamp. It worked very well. I also used a skateboard wheel that I made a groove in with a drill and file...chucked the wheel into a drill press and used a file to "route" the groove...as a chain guide and mounted this with a muffler clamp also. The muffler clamp "legs are long enough to extend into the chain path there by making them very useful for improvised guides, tensioners etc. This was on a homebuilt recumbent a few years ago.