Help....Husheng stock carb question

Discussion in 'Performance Mods' started by cj6jeep80, Feb 11, 2015.

  1. cj6jeep80

    cj6jeep80 New Member

    Can someone please clarify the position of the little shaft that came out of my 49cc carb after removing my main jet....Removed the jet and this shaft fell out before I could remark its position....Is the position in my photo correct or do I need to reverse it?

    Thanking you in advance 20150209_150115[1].jpg
     
    Last edited: Feb 11, 2015

  2. jhammondcpa

    jhammondcpa Active Member

    Check with Msiert on this site! Murray just took his apart, cleaned and reassembled.

    Jimmy H.
     
  3. msiert

    msiert Member

    You want the smaller skinnier end to go in first....it goes into the intake and you will see it protrud into the intake (between the choke plate and the throttle butterfly). It really only goes in one way the other end won't go through the hole in the intake.
     
  4. cj5jeep80

    cj5jeep80 New Member

    Fits.....Thx very much
     
Loading...