Carby one problem after another

Discussion in '2-Stroke Engines' started by daveet66, Oct 5, 2015.

  1. daveet66

    daveet66 Member

    Does anyone have any ideas on what i can do to fix small knob on throttle cable broke off without soldering? Thanks
     

  2. jaguar

    jaguar Well-Known Member

    don't know what "knob" you are talking about but glue it if plastic.
    if metal you might be able to glue it with JBWeld
     
  3. daveet66

    daveet66 Member

    The small knob on end of throttle cable that goes to slider probably just get new cable not worth all the hassle
     
  4. crassius

    crassius Well-Known Member

    get a new one while hoping the old end piece didn't go into motor
     
  5. Purple Haze

    Purple Haze Active Member

    If you are going to get a new cable, why not upgrade to the SBP throttle? It has bearings and is made from aluminum. Makes the stock throttle look like the cheap junk it is. Plus, you can get the cable in different lengths to fit your bike without that big loop sticking out in front.
     
  6. Fabian

    Fabian Well-Known Member

    I had one problem after another for a good 2 years, until i finally got my bike properly reliable. In fact it was 2 years of pure hell.
     
Loading...