Upgrade parts are on the way!
After talking to you, I decided to re-think the bearing plate position. Although I doubt it will make any difference, I am going to suggest placing the carier horizontal, rather than vertical [see pictures]. My reasoning is this, the adapter should follow the belt path for best support, and best support would be where the ends of the bearing support bracket touches the motor crankcase.
Should torque the long 6 MM grade 8 bolt @ 80 INCH pounds. Also use blue Loctite on the bolt to add additional resistance to working loose.
Have fun,
After talking to you, I decided to re-think the bearing plate position. Although I doubt it will make any difference, I am going to suggest placing the carier horizontal, rather than vertical [see pictures]. My reasoning is this, the adapter should follow the belt path for best support, and best support would be where the ends of the bearing support bracket touches the motor crankcase.
Should torque the long 6 MM grade 8 bolt @ 80 INCH pounds. Also use blue Loctite on the bolt to add additional resistance to working loose.
Have fun,