UTurn
New Member
scubaru89,
To answer your question on the magnito output it is 6 volts (white wire) but you would be robbing power from the motor by using it and it's just a trickle, not sure of the amps. There is a company called Wonderful Creations that sells through eBay and they have a Generator unit you mount on the other side of the magnito that works Great. This is the site -
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=400109362625&ssPageName=STRK:MESE:IT
They have it for 6 volt output and 12 volt output. They also have a little Charger unit you can add with it to charge a battery. I had that setup on my last bike along with the small motorcycle battery and a power inverter. I was able to run my lights (all LEDs) plus charge my laptop, my iPhone, or even power a regular household light bulb. It was kinda' cool actually.
For my lights I used one of those Bullet Headlights you might see on older bikes and gutted it out. I found a company that sold LEDs for about everything and bought a dual intensity cluster and just glued it into the old bullet light. It gave me a pretty bright low beem and high beem headlight. Also impressive. They also had LED lights for 6 and 12 volt systems that you could just take the old bulb out of a car tail light and put the LED in. That simple. So I had a trailer tail/brake light I got from the auto parts store and just put a tail/brake dual intensity LED in it. Did the same for the Turn Signal/Running lights front and back. Here is the site for them -
http://www.customdynamics.com/motorcycle_led_bulbs.htm#Genesis_LED_Clusters_
You ought to take the time to go through these two sites. Might give you some great ideas.
To answer your question on the magnito output it is 6 volts (white wire) but you would be robbing power from the motor by using it and it's just a trickle, not sure of the amps. There is a company called Wonderful Creations that sells through eBay and they have a Generator unit you mount on the other side of the magnito that works Great. This is the site -
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=400109362625&ssPageName=STRK:MESE:IT
They have it for 6 volt output and 12 volt output. They also have a little Charger unit you can add with it to charge a battery. I had that setup on my last bike along with the small motorcycle battery and a power inverter. I was able to run my lights (all LEDs) plus charge my laptop, my iPhone, or even power a regular household light bulb. It was kinda' cool actually.
For my lights I used one of those Bullet Headlights you might see on older bikes and gutted it out. I found a company that sold LEDs for about everything and bought a dual intensity cluster and just glued it into the old bullet light. It gave me a pretty bright low beem and high beem headlight. Also impressive. They also had LED lights for 6 and 12 volt systems that you could just take the old bulb out of a car tail light and put the LED in. That simple. So I had a trailer tail/brake light I got from the auto parts store and just put a tail/brake dual intensity LED in it. Did the same for the Turn Signal/Running lights front and back. Here is the site for them -
http://www.customdynamics.com/motorcycle_led_bulbs.htm#Genesis_LED_Clusters_
You ought to take the time to go through these two sites. Might give you some great ideas.
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.