GearNut Active Member Local time 11:31 AM Joined Aug 6, 2009 Messages 1,676 Location So. Cal Nov 6, 2009 #31 I used to set the link on two 1/4" nuts. One nut under each pin of the offending link, and pound out the pins with a dull center punch. A sharp punch can spread the end of the pin larger and make the removal process harder.
I used to set the link on two 1/4" nuts. One nut under each pin of the offending link, and pound out the pins with a dull center punch. A sharp punch can spread the end of the pin larger and make the removal process harder.