All Done!

All Done!

  • 0
  • 3
I see red...

I see red...

  • 0
  • 0
One coat of primer done...more (lots more) to go, but I can see the end in site!

One coat of primer done...more (lots more) to go, but I can see the end in site!

  • 0
  • 0
My new heavy-duty wheels (with a dyno and a front brake!)...and check out my retro Quick Brick tires!

My new heavy-duty wheels (with a dyno and a front brake!)...and check out my retro Quick Brick tires!

  • 0
  • 0
Sand sand sand...Bondo Bondo Bondo...sand sand sand...

Sand sand sand...Bondo Bondo Bondo...sand sand sand...

  • 0
  • 0
The final thing I wanted to accomplish was to remove the "chain tensioner" from the chain on my faux oil pump. To accomplish this required significan

The final thing I wanted to accomplish was to remove the "chain tensioner" from the chain on my faux oil pump. To accomplish this required significan

  • 0
  • 0
Here's how everything looks so far...primered tank and copper fuel line...

Here's how everything looks so far...primered tank and copper fuel line...

  • 0
  • 0
The rubber hose looks ugly…and I wanted a copper fuel line anyway. Without a whole lot of thinking, I was able to get the fuel line installed.

The rubber hose looks ugly…and I wanted a copper fuel line anyway. Without a whole lot of thinking, I was able to get the fuel line installed.

  • 0
  • 0
I got the tank close enough to give it a coat of primer. I'll work on the finish more when I'm ready to paint, etc. That'll be awhile…so the prime

I got the tank close enough to give it a coat of primer. I'll work on the finish more when I'm ready to paint, etc. That'll be awhile…so the prime

  • 0
  • 0
Sanding…Bondo…sanding…Bondo…and so on and so forth…

Sanding…Bondo…sanding…Bondo…and so on and so forth…

  • 0
  • 0
Alternate angle of the new fork...

Alternate angle of the new fork...

  • 0
  • 0
Got the new fork installed...

Got the new fork installed...

  • 0
  • 0
Here's where I am with the bike right now...

Here's where I am with the bike right now...

  • 0
  • 0
I drilled and tapped a hole and finished the installation...

I drilled and tapped a hole and finished the installation...

  • 0
  • 0
I moved the choke from the handlebars to the frame. Here I welded it to the frame on the seat tube...

I moved the choke from the handlebars to the frame. Here I welded it to the frame on the seat tube...

  • 0
  • 0
This was the mockup I created before beginning this project...it's the direction I'm heading (more or less)...

This was the mockup I created before beginning this project...it's the direction I'm heading (more or less)...

  • 0
  • 0
Here's a picture after just finishing the rear fender...

Here's a picture after just finishing the rear fender...

  • 0
  • 0
Progress picture...

Progress picture...

  • 0
  • 0
That's better! My "engine" :-)

That's better! My "engine" :-)

  • 0
  • 0
Bracket for chain tensioner welded to the frame...

Bracket for chain tensioner welded to the frame...

  • 0
  • 0
The bracket I made for my seat...

The bracket I made for my seat...

  • 0
  • 0
Here's the beginning of my faux oil tank...it's a fan clutch from an old Land Rover and some sheet aluminum...

Here's the beginning of my faux oil tank...it's a fan clutch from an old Land Rover and some sheet aluminum...

  • 0
  • 0
Progress picture...

Progress picture...

  • 0
  • 0
Cleaning up my welds...

Cleaning up my welds...

  • 0
  • 0
iDood

My BTR Project...

I'm building a board track racer using a little Chinese motor. I've done a lot of work so far...I'll post some pictures here...there's more on my blog if you're interested in the details of the build: http://billsbike.blogspot.com
Click to expand...
There are no comments to display.

Album information

Album owner
iDood
Date created
Item count
38
View count
3,361
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

iDood

iDood

Media items
38
Albums
0
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top