The original tank was attached with waterproof polyurethane adhesive and foamed into place. Use minimal expanding foam or be very careful about how m
Starter cover with MBc sticker. It's a perfect fit.
Old railroad lantern made into headlight/speedo housing- custom face on speedo
Smoothed after the filler with primer/surfacer
The original tank was attached with waterproof polyurethane adhesive and foamed into place. Use minimal expanding foam or be very careful about how m
This the first coat of filler, most of it ended up sanding dust. Several coats, much sanding.
This is after 1 coat of resin and sanding. I used two coats- sanding with 60 grit between.
I used industrial spray adhesive to attach the fleece- but let it completely cure and it will work well. I jumped the gun and the fiberglass resin li
H

The original tank was attached with waterproof polyurethane adhesive and foamed into place. Use minimal expanding foam or be very careful about how m

  • Like
Reactions: Cozmik Mezzenger
There are no comments to display.

Media information

Album
HoughMade Cycle Works Build
Added by
HoughMade
Date added
View count
507
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top