This the first coat of filler, most of it ended up sanding dust. Several coats, much sanding.
Old railroad lantern made into headlight/speedo housing- custom face on speedo
Smoothed after the filler with primer/surfacer
The original tank was attached with waterproof polyurethane adhesive and foamed into place. Use minimal expanding foam or be very careful about how m
This the first coat of filler, most of it ended up sanding dust. Several coats, much sanding.
This is after 1 coat of resin and sanding. I used two coats- sanding with 60 grit between.
I used industrial spray adhesive to attach the fleece- but let it completely cure and it will work well. I jumped the gun and the fiberglass resin li
I covered the form with fleece, but it ended up rough and needed much filling and sanding. I would use fiberglass cloth. It would smooth better and
H

This the first coat of filler, most of it ended up sanding dust. Several coats, much sanding.

There are no comments to display.

Media information

Album
HoughMade Cycle Works Build
Added by
HoughMade
Date added
View count
626
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top