Clutch question?!

[Carl Walichnowski]

So after reinstalling my clutch I now have an issue I hope the more experienced members can help me resolve. When I pull my clutch it looks like it engages properly but when I release the lever the clutch arm doesn't swing all the back out to its original position. My motor isn't operational at the moment (waiting on an adapter to arrive) but it looks like it'll be an issue, I'd much rather resolve this now then later. Thx

 

[crassius]

sounds like flower nut too tight - go thru all steps of cable/clutch adjust
when finished, that arm should be close to pointing straight back

 

[Carl Walichnowski]

sounds like flower nut too tight - go thru all steps of cable/clutch adjust
when finished, that arm should be close to pointing straight back

I never lossened or tightened the flower nut. I'll have to find somewhere that will walk me through all the initial clutch install steps, the original instruction I got with the kit suck.

 

[crassius]

all the steps are here

 

[Carl Walichnowski]

Yea I seen a few. I think I'll wait til the adapter arrives and have everything able to run the I'll trouble shoot & go from there.