Gastank frames from Zeda and Cdh

[GreasyChris]

Back in the early spring I put together a zeda gastank frame bike together. I assumed the frame would have been leak tested before it left the factory and I was wrong. It turns out where they welded the bung for the fuel petcock had a small pinhole. It didnt take long for the gas to ruin the paint on the seat tube. The moral of the story is if you're gonna use a gastank frame I would highly recommend sealing the tank first. I used POR15 gastank sealer. Since I disassembled the bike for new paint I made some changes. Heres some before pics of the bike.

And after pics.

 

[Member 30571]

Very nice !!!.

 

[GreasyChris]

Very nice !!!.

Thanks

 

[wan37]

Any problems with back hub adaptor two inside screw coming lose? Other than that. I like it very much so! About after two rides I have to tighten mine up.

 

[GreasyChris]

Nope I use loctite on all my fasteners.

 

[wan37]

Maybe I’ll buy a new tube of loctite mine might be to old! Thanks Chris