Gx35 vs Midi Moto Clutch

Discussion in '4-Stroke Engines' started by greguk, Jun 14, 2011.

  1. greguk

    greguk Member

    My clutch squeak a bit so looks like I will have to replace it sooner or later. I will take off that engine from friction drive to find out what's going on but if clutch shoes are used it would be nice to replace it straight away.

    I believe Gx35 and Midi Moto Clutch might be similar. Difference is in price and availability. I will have to order Honda one or buy straight away http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190535618920&ssPageName=STRK:MEWAX:IT or http://cgi.ebay.co.uk/PETROL-SCOOTE...95?pt=UK_Motorcycle_Parts&hash=item2c5d046b93

    Measures Midi Moto Clutch are: 10mm bolt holes 52mm hole centers 77mm diameter 14mm deep.

    Anybody know the measures of Honda one or used 2 stroke clutch on Honda?

    It's not a problem to trim in size - it's more about holes.

  2. HeadSmess

    HeadSmess Well-Known Member

    i have a feeeeeeeeeling, that, being based on brushcutters... they all seem to be interchangeable. everything in my experience has been. i now have a kawasaki 35 shaft with a robin 25 on it... :) well, it blew up, didnt it! (the kawa 35 engine that is...)

    stihl, echo, husquvarna, robin, shindaiwa...yet to find any that use different clutch shoes.

    all have different splines though... thats irrelevant to you.

    um. by the way it sounds, you HAVE a honda? so why not measure it? gunna have to pull it apart anyway...

    have fun undoing those two bolts! lol.....
  3. greguk

    greguk Member

    If anybody had Honda GX31-35 clutch measures please let me know.
    Last edited: Jun 15, 2011