Honda GX100

[s_beaudry]

Here is the auction for it on Ebay...

http://cgi.ebay.com/GX100-QA2-3-hp-...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50


Would I be right in guessing this is the same as the GX50 & GX35 with the higher idle?

I see it has the same 5/8" shaft, curious about whether it could be set with just a centrifugal clutch.

Price seems very good, as well as the seller...

 

[HoughMade]

Twice the displacement (about 100ccs versus 50 ccs), half the engine speed (3600 rpm versus over 7000 rpm), twice the weight (23 lbs. versus under 12 lbs.) for 12% more power than the the GXH50.

 

[s_beaudry]

So I am taking it (just for knoweldge) that the GX100 could be slapped on with a regular centrifugal clutch and be ran that way???

Thanks for the quick reply houghmade...

 

[HoughMade]

I think it could be done, but you would still need a pretty big rear sprocket.

 

[infowarrior]

i have a robin/subaru eho35/4 stroke; best small rice grinder ever built...

 

[ZnsaneRyder]

IMO you'd be better off with a 2.5HP 79cc HF chinese engine, than a GX100. Cheaper too.

 

[wcocc]

works great, see my bike in picture gallery, nirve/stretch cruiser. using a gx100 with a maxtorque centrifical 5/8 clutch, 2/1 reduction etc. etc. belt drive.

mike

 

[Guest-840697]

works great, see my bike in picture gallery, nirve/stretch cruiser. using a gx100 with a maxtorque centrifical 5/8 clutch, 2/1 reduction etc. etc. belt drive.

mike

Where did you order your kit for the Honda gx100 and what’s the kit called ? I just picked that motor up at the pawn shop for 150