crassius Well-Known Member Local time 1:57 PM Joined Jul 23, 2012 Messages 4,550 Nov 8, 2017 #51 with a 41T, you should have more low end power than it seemed in vid - look at your plug and see if you are a bit too lean Last edited: Nov 8, 2017
with a 41T, you should have more low end power than it seemed in vid - look at your plug and see if you are a bit too lean
T Travis David Greene Member Local time 4:57 PM Joined Nov 1, 2017 Messages 32 Location New york Nov 8, 2017 #52 It looks as if I am running too lean but im very confused as to how to make it run richer
crassius Well-Known Member Local time 1:57 PM Joined Jul 23, 2012 Messages 4,550 Nov 8, 2017 #53 first thing to do is lift needle a bit if you're sure you don't have an air leak somewhere
T Travis David Greene Member Local time 4:57 PM Joined Nov 1, 2017 Messages 32 Location New york Nov 9, 2017 #54 Lifted the needle a bit then tried to run it to see how it sounded and the piston seized up in the cylinder about five minutes after idling. I think I'm done with this motor and its headaches
Lifted the needle a bit then tried to run it to see how it sounded and the piston seized up in the cylinder about five minutes after idling. I think I'm done with this motor and its headaches
crassius Well-Known Member Local time 1:57 PM Joined Jul 23, 2012 Messages 4,550 Nov 9, 2017 #55 bummer, must have been lean too long
T Travis David Greene Member Local time 4:57 PM Joined Nov 1, 2017 Messages 32 Location New york Nov 9, 2017 #56 I really appreciate the help even though the outcome wasn't so good. Thank you very much for lending a helping hand
I really appreciate the help even though the outcome wasn't so good. Thank you very much for lending a helping hand