now I need a flasher relay...

[RedBaronX]

Sure you can solder the wired directly to the flasher spade terminals, but i would not recommended it. Imagine if the flasher broke, well you would need to unsolder the connections to replace it, Get the female spade connectors and crimp or solder them to the wires and when or if it breaks you can just plug and play

hard-wired in will work, but it's not the most convenient way to do it. got it.

 

[arkives1]

Don't go to the one on 14th and Burnham unless you speak fluent Spanish!

 

[RedBaronX]

Don't go to the one on 14th and Burnham unless you speak fluent Spanish!

there is one over on Oklahoma-- and I can get there on the bus... as my bike is out of commission :snobby:

 

[GearNut]

RedBarronX,
Auto Zone sells this too:
http://www.autozone.com/autozone/ac...-26fp?itemIdentifier=758569&_requestid=408745

This looks like the flasher that I used, but I do not know for sure:
http://www.autozone.com/autozone/pa...er&fromString=search&itemIdentifier=6413_0_0_