132 miles and only one "problem" - any ideas?

[Toby woodman]

so I've now got 6 hours on my bike, with an average speed of 22 miles an hour that's over 130 miles. So far I haven't even had to tighten a motor mount or even adjust a chain tensioner. The only sort of problem I have encountered is that the other day I had to take the wheel of so I could get the bike in a truck, I discovered that getting the wheel back on with such a heavy bike is extremely hard with nothing to lean it against. If I were to get a flat tire I would have to put the bike down on its derailleur and it would be hard to get the wheel on. Does anyone know of a kick stand that keeps the rear wheel off the ground even if there is no wheel on the back of the bike or does anyone know of any solutions I could carry in my bag since I carry a large bag with me when I ride, maybe some sort of stand. Thanks for the help

 

[Gordy]

I have looked at a whizzer stand, @DAMIEN1307 uses one that he is quite fond of.

 

[Toby woodman]

Do you have to have factory frame mounts for one of those stands

 

[Wrench]

so I've now got 6 hours on my bike, with an average speed of 22 miles an hour that's over 130 miles. So far I haven't even had to tighten a motor mount or even adjust a chain tensioner. The only sort of problem I have encountered is that the other day I had to take the wheel of so I could get the bike in a truck, I discovered that getting the wheel back on with such a heavy bike is extremely hard with nothing to lean it against. If I were to get a flat tire I would have to put the bike down on its derailleur and it would be hard to get the wheel on. Does anyone know of a kick stand that keeps the rear wheel off the ground even if there is no wheel on the back of the bike or does anyone know of any solutions I could carry in my bag since I carry a large bag with me when I ride, maybe some sort of stand. Thanks for the helpView attachment 194684View attachment 194685

Here read this thread, it talks all about the center stands

Can I flip my bike upside down to do maintenance work?

Hi all, Fairly new to this hobby. I Installed a 80cc motorized kit from amazon on a pacific cruiser. My back tire came loose and I was wondering if I can flip my bike on the ground to do maintenance work? Will that mess anything up?

motoredbikes.com

 

[DAMIEN1307]

Does anyone know of a kick stand that keeps the rear wheel off the ground even if there is no wheel on the back of the bike or does anyone know of any solutions

I have looked at a whizzer stand, @DAMIEN1307 uses one that he is quite fond of.

It's easy, all you have to do with the stand I bought from Amazon is remove the regular kickstand and put this one in its place.

https://www.amazon.com/dp/B0BDPGJ896/ref=twister_B0BDQB567Z?_encoding=UTF8&psc=1

 

[Gordy]

It's easy, all you have to do with the stand I bought from Amazon is remove the regular kickstand and put this one in its place.

https://www.amazon.com/BV-Kickstand-Center-Mount-Bicycle/dp/B00LNLXML4/ref=pd_nav_hcs_rp_2?psc=1

I just realized the way I worded that it sounds like you use a whizzer stand